Frequently Asked Questions
FAQs
Is BluDento also a Bluetooth audio transmitter?
There is receiver mode ONLY on BluDento.
All the THREE connectors on BluDento are OUTPUTS not INPUTS.
Bluetooth is the ONLY INPUT on BluDento.
Can you put a passkey/pin code on the device for a more secure connection ?
This feature is supported on model BLT-2/BLT-HD/B2 right now.
How to confirm BLT-HD is working at aptX HD ?
As to Android phone, you have to open the "Developer options" and click the menu of "Bluetooth Audio Codec" to see what are the codecs are listed. You can turn to the manufacturer of phone for help.
If there is aptX HD, just choose it to make it work at aptX HD option.
Normally there are AAC, SBC, aptX, aptX LL, aptX HD, LDAC options which depends on your phones.
Is this antenna removable if I wanted to add an antenna extension cable ?
The antenna connector is I-PEX MHF, it is removable if you can open the housing yourself.
What's the difference between the BLT-2 and the BLT-HD ?
BLT-HD is LDAC supported but BLT-2 NOT.
Recent Blogs
September 11, 2026
Transmitter vs Receiver: Which Bluetooth End You Need
Compare transmitter vs receiver roles in a Bluetooth chain, match...
September 10, 2026
RCA Bluetooth Transmitter and Receiver in One Box
See how an RCA Bluetooth transmitter and receiver in one...
September 07, 2026
RCA to Bluetooth Transmitter: 5 Checks Before You Buy
Compare RCA to Bluetooth Transmitter picks by input, codec, latency,...
4 comments
Hi, I’ve had my BluDento BLT-HD switched off for a few month. Now that I’ve powered back on the blue light has come on and stays on even though nothing is paired to it. I have tried turning the power on and off a few times but it stays in the on mode, so I’m unable to pair my phone to it which has my music stored. Can I default the unit or is there a problem with it, help.
Thks Chris
My BluDento BLT-HD has stoped working. I haven’t been using lately and plug it in and no blue light, nothing it worked fine last time I used it. I always unplug when not in use, any idea how i can reset it.I tried different power cord to no avail, tested the power cord all seams fine. Can’t understand how it just stopped working.
Thanks for your help
Yes I just received my bludento B2. 1 don’t have an electric switch on the back of my receiver can the bludento stay on when not in use. The receiver works Great…. Thank you
can I use it to connect my Sharp stereo to a passive subwoofer?
Leave a comment